Special Purpose Machines

With our domain expertise, we offer a comprehensive range of Other Products such as electric discharge saws and flow forming machines. These are manufactured in compliance with the set industry standards to ensure optimum quality in the end product. We offer our range of electric discharge saws and flow forming machines in various models and other technical specifications, as per the specific demands of our valued clients.

Electric Discharge Saw

Our organization is involved in manufacturing and exporting an extensive range of electric discharge saw. These are used for the sawing of spherical or slanting surfaces with minimum loss of material, as the cutting width is less than 1.5 mm. Our range of electric discharge saw is known for low maintenance, high performance, and excellent sawing efficiency.

Features:-

It can cut any electrically conductive material irrespective of its hardness
Sawing of spherical or slanting surfaces
Faster than band saw in case of hard material
Minimum loss of material, as the cutting width is less than 1.5 mm
No deformation of work piece
Good sawing efficiency irrespective of hardness & resistant strength
Only small zone gets affected due to heat generation
Very low running expenses

Technical Specifications:

Machine Tool	EDS200	EDS400	EDS600	EDS1000
Maximum Cutting Limits (Cross-section of work piece)	200 mm x 200 mm	400 mm x 400 mm	600 mm x 600 mm	1400 mm x 1000 mm
Work Table dimensions	400 mm x 600 mm	600 mm x 800 mm	800 mm x 800 mm	1400 mm x 1000 mm
Longitudinal travel (Y)	600 mm	600 mm	600 mm	NA
Vertical saw travel (Z)	250 mm	250 mm	650 mm	1150 mm
Rapid free rate	600 mm/min	600 mm/min	600 mm/min	600 mm/min
Cutting (working) saw servo feed	40 mm/min	40 mm/min	40 mm/min	40 mm/min
Average cutting speed	10 -15 cm²/min	10 -15 cm²/min	10 -15 cm²/min	10 -15 cm²/min
Saw speed	16 m/sec	16 m/sec	16 m/sec	16 m/sec
Tension on saw belt	300 kg	300 kg	300 kg	300 kg
Electrode material			Mild steel

Send Enquiry

Flow Forming Machine

We hold expertise in offering a wide range of flow forming machine, which is fabricated inline with the latest technological advancements in the market. Our range of flow forming machine is facilitated with cross slides, indexing head assembly and roller heads to ensure optimum performance.

Features:-

Head stock
Longitudinal slides (Z axis)
Cross slides
Indexing head assembly
Roller heads
Lubrication system

Technical Specifications:-

M Base diameter of conical liners: 30 mm to 300 mm
Minimum full cone angle to be formed: 40º
Maximum blank thickness of work piece for flow forming of cone: Copper : 6 mm
EDD steel: 4 mm
Longitudinal force: 500 mm
Cross slide stroke for each slide: 300 mm
Spindle speed infinitely variable: 25 to 1000 rpm
Longitudinal feed infinitely variable: 2500 mm/min
Longitudinal rapid travel: 5000 mm/min
Cross slide infinitely variable: 2500 mm/min
Cross slide rapid travel: 5000 mm/min
Longitudinal slide: 80 KN / 8000 Kg

Send Enquiry